Q: One visitor asked, "I am going to replace my carpeted stairs with oak treads and paint the risers. Do you have any suggestions on removing the existing pine treads and attaching the new oak treads? I have read about using glue and nailing but what type of glue/adhesive and since I'd like to limit the number of nail holes, how few can I get away with? The treads are 10" x 38"."
A: To actually remove the treads, you would have to have access to the back side of the staircase. Remove the wedges and then the treads. Otherwise, you have to cut the lip off all the existing treads and glue down new ones on top. I really like urethane adhesives such as Bostik's Best. If there are contaminants on the existing treads that would also have to be removed. It is a lot of work.
Related questions about wood stairs and more:
>Does Face Lift Floors sell wood?
>Finding it hard to match an existing floor?
>I removed cabinets in our kitchen and found unfinished flooring. How do I match this area to the rest of the kitchen floor?
>How do I prepare wood floors for folk art style painting?
>Should I frame my fireplace? How?
>How do I install railing posts on hardwood?
>What type of tool should be used to install tongue in groove flooring?
>Do I just router the bullnose along the 'grain end' of the stair tread?
>I am told by the builder that stair treads have to be glued in. Can I simply put oak slabs over the existing tread? Also, do I have to cut off the outer lip if I go with a thin stair nosing?
>Pneumatic hardwood flooring Nailer or Stapler?
>Should I install veneer on treads?
>What should we do with our plywood staircase?
>How do I remove adhesive from my risers?
>How do I install hardwood on my stairs?
>Why doesn't anyone want to sand my risers?
>My stairs are creaking a lot and i want to fix this. I have taken up the carpet but can't find any nail heads, I do not know where the joists are, and I can't access the stairs from below. What should I do?
>What is the best type of sander to use on pine treads?
>What is the best way to refinish stair treads?
>Should I use veneer on stair treads?
>What is the best thing to put on interior oak stair treads?
>What kind of paint should I use on the railing?
>Can we stain and polyurethane the stairs before installation?
>Is it a good idea to put hardwood on your stairs?
>Should I glue solid oak treads onto existing fir treads?
>I would like to place a laminate hardwood over my stairs. I do not want to have to remove the stairs and rebuild. How do I do this?
>When placing hardwood on stair treads, do they have to be 1" thick or thicker? And do you use one plank of hardwood or could you use strips of hardwood for stair treads?
>Do I have to remove my banister on my stairs to install the hardwood or can it be left in place?
>Who do I turn to for treads and railing to match my floors?